Loading... Please wait...

Static Target Hanger

  • Image 1
  • Image 2
  • Image 3
Price:
$16.25
Weight:
3.00 LBS
Shipping:
Calculated at checkout
Quantity:


Product Description

The static target hanger is constructed of heavy wall steel tube and drilled to accept a 1/2” carriage bolt.  The kit comes complete with the grade 5 carriage bolt, stainless steel spring, locknut and hanger. 

 

Target and 2x4 not included.

 

The static hanger works best with the 8”+ sized statics, and will hang even the largest static targets. The 5” statics will fit but leave more of the hanger exposed to direct hits from the shooter. 

 


Find Similar Products by Category


Write your own product review

Product Reviews

Showing reviews 1-10 of 24 | Next

  1. Great Hanger

    Posted by Josh on 3rd Feb 2014

    I used this in conjunction with a 2x4 stand and base that I built. It worked great. The carriage bolt provided is very hard and didn't appear to be damaged by the occasional hit from my 9mm and 357 magnum. I would definitely recommend this over a shepard hook any day. My rounds were deflected on the ground right in front of the stand and the target remained very stable for follow up shots.


  2. Great in Conjunction with the Target Stand

    Posted by Dave on 24th Dec 2013

    This works great with the target stand. It makes hanging the target nice and simple and the bullets deflect straight downward just as it says they will. If you purchase the target stand then definitely purchase this hanger as well.


  3. A Must Have

    Posted by Doug French on 21st Dec 2013

    I use this with a 10 inch round plate and it has performed flawless for several thousand rounds from 22 cal, 9mm, 40 s&w, 45 ACP. Most rounds were fired from approx. 30 to 40 feet away. All rounds were deflected downward and all had a nice sound when hit.


  4. Best target hanger ever.

    Posted by Unknown on 23rd Aug 2013

    I have purchased these hangers 3 different times as I expand my shooting range. They have all been produced exactly the same and function perfectly and fit the 2X4 stakes nicely. The design is simple but very effective deflecting the bullets down and away from the shooters. Would highly recommend to anyone looking for a trouble free steel target hanger.


  5. Hanger exposed to be hit

    Posted by Unknown on 15th Aug 2013

    When using the 8" or 10" round plates the top corners of the hangers are exposed behind the plate. I've hit two of my 5 hangers already. 9mm dents the hanger a little. 45 leaves a sizable dent in the hangers.


  6. Great target hanger. solid construction

    Posted by Mike on 26th Jul 2013

    I would recommend this target hanger due to its ridgidity. It will hold my AR500 Steel plate with no problem. And the cost after shipping is not bad.


  7. Target Holder

    Posted by Denny Winclawski on 17th Jun 2013

    Great target holder. Stays in place and good reaction. Good Price and great service and fast shipping. Bought from them before and will again.


  8. Target Hanger

    Posted by Mike on 14th Jun 2013

    A very simple idea that works. I'll be ordering another one.


  9. TARGET HANGER

    Posted by Unknown on 23rd May 2013

    VERY WELL MADE AND PACKAGED.


  10. Did not use.

    Posted by Lennie Hughes on 11th Feb 2013

    Did not use as I found that wrought iron shepard hook plant hanger work much better, are lighter, easier to set up and allow bullet deflection directly downward. I do not need them for the 1/4" steel, but they may be usuable when I order the 3/8" steel or other heavier targets


Showing reviews 1-10 of 24 | Next


Add to Wish List

Click the button below to add the Static Target Hanger to your wish list.