Add this kit to the Rigid Conduit gong stand and you can hang two targets on one stand. You will need to buy the Rigid Conduit Gong Stand Kit to complete the stand. This kit only includes the extra parts needed for two targets(stop collars and gong mounts). One picture shows a complete unit when combined with the Rigid Conduit Gong Stand Kit and the other picture contains just the items in the double gong kit.
We do not recommend using the stand with targets over 75lbs or with rifles larger than 338.
NOTE: The kit DOES NOT include the rigid conduit. It is shown in the pictures for demonstration only. You will need to buy the rigid conduit at your local hardware store. The stand was only designed to work with rigid conduit. It WILL NOT work with other conduit or plumbing pipe.
NOTE: This kit requires the following operations to be performed: cut tube to length, measure 1.5” from end, drill a 5/16” hole and deburr ends. If you are unsure of how to perform any of these operations you may want to consider one of our standard gong stands(36x36 or 60x60). Detailed instructions are included with the kit.
If you already have an EMT stand Kit you can buy the Rigid Conduit Double Gong Stand Kit to convert it. The only differance between the two stands are the lock collars and gong mounts. The side plates and pins are the same. This also means you can use EMT conduit for the legs to save weight.
Some of you may be asking what the difference is between rigid conduit and EMT. Both have the same inside dimension, but rigid conduit is much thicker. This allows the rigid conduit to hold much more weight. It also weighs and costs more than the EMT. Refer to the item descriptions for target weight and caliber capacities.